HouseBot

How Is possible configure the ip parameters (gateway Ip, http port, etc) in the housebot web server to access using software remote from a remote LAN.

Regards, Miguel Arcas

Please,

Answer me, is possible using Software remote through internet?
How must we configure the gateway IP, and the connection port ?

Regards
save

http://www.cebotics.com/forums/viewtopi ... 1&t=856580

This was on page two of this forum. Top left of the page has a text box for searching.

Osler

Osler,

Does the HB server always run with the port 5015, or is it possible to change it??


Thanks, save

It's always 5015 internally, but using your router's configuration you can specify whatever external port you wish. Refer to you router's documentation for that.

Terry

Taken from the HoueBot help file:

To change the port number on the HouseBot server machine:

• 1. Start Regedit on the HouseBot machine.
  2. Navigate to HKEY_LOCAL_MACHINE\Software\CeBotics\HouseBot\Configuration Settings
  3. Create a new ‘DWORD’ value registry entry with the name “Server Port”.
  4. Assign it the value of the new port.
  5. Restart HouseBot.

To change the port number on the Software Remote machine:

• 1. Start Regedit on the HouseBot machine.
  2. Navigate to HKEY_LOCAL_MACHINE\Software\CeBotics\HouseClient\Configuration Settings
  3. Create a new ‘DWORD’ value registry entry with the name “Server Port”.
  4. Assign it the value of the new port.
  5. Restart the Software Remote.